Product Image
Crack Surface Seal Paste XQ-LF-SS
Thixotropic epoxy paste for sealing crack surfaces before injection. Forms a dam that contains injected resin within the crack path.
- Rapid tack — injectable within 2 hours
- High peel strength
- Easy to remove after injection
- Works on wet surfaces
- Transparent when cured
Technical Specifications
| Tensile Strength | ≥ 20 MPa |
| Peel Strength | Excellent |
| Set Time | 2 h at 25°C (tack-free) |
| Full Cure | 24 h |
| Mix Ratio | A:B = 1:1 |
| Packaging | 1 kg set |
Applications
Crack injection preparationSurface dam for resin containment
Related Products
Low-Viscosity Crack Injection Resin XQ-LF-L
Ultra-low viscosity epoxy resin for gravity-feed or low-pressure injection of fine cracks (0.1–0.5 mm). Penetrates deep into hairline cracks.
Medium-Viscosity Crack Injection Resin XQ-LF-M
Medium-viscosity epoxy resin for pressure injection of moderate to wide cracks (0.5–5 mm). Structural repair restoring load-bearing capacity.
Ready to Strengthen Your Next Project?
Get expert guidance and competitive quotes from our engineering team.